Connections; Power; Figure 9: Two/Three-Manual Setup Mounted 'Tilt-Up - Classic Organ Works CMK-1 User Manual

Figure 9: Two/Three-manual setup mounted 'tilt-up'

Figure 10: Accessing keyboard electronics

Connections

Power

The user must connect Power and MIDI for each keyboard. There are several ways to provide power to the CMK
which will depend on the application. The CMK requires between +9V and +15V DC power at a minimum current of
400mA. If the CMK is to be used as a standalone unit, the most convenient method of providing power would be to
use the supplied 2.1mm Co-axial DC adaptor.
_________________________________________________________________________________________________________
Page-18
CMK-1 Manual (Issue-1) October 20, 2004