Figure 33: Save Program Data To File Window - Classic Organ Works CMK-1 User Manual

A window prompting the user for a filename should appear:
If the configuration uses the same name as a previous configuration, a warning window will ask the
user for confirmation in replacing the old file with the newly revised one.
•
Load Program Data From CMK – Loads a configuration file from the CMK memory chip. A CMK
may contain numerous configuration files which are selectable by changing the DIP-switch so, the
software displays an initial configuration number as set in the DIP-switch. If a configuration number
different from the DIP switch is required, it may be specified by the user.
Icon: Keyboard shortcut: Ctrl+L
To load a configuration from the CMK memory chip, the user must ensure that the CMK is connected
to power and to a computer using a MIDI cable (please see software installation for details on
connecting MIDI devices to computers). Then go to File → Load Program Data From CMK, or use
the keyboard shortcut or icon as shown above. A window appears attempting to make a connection
with the CMK as shown in Figure 35.
_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)

Figure 33: Save Program Data to File Window

Figure 34: Confirm replacing of file window
Page-42
October 20, 2004