Configure A Cmk From Scratch - Classic Organ Works CMK-1 User Manual

Configure a CMK from scratch

This editing mode allows the user to create a new configuration for the CMK. The user can then choose to save the
new settings on a computer or transfer the file to the CMK memory as a new configuration. When a user selects the
'Configure a Classic CMK from scratch' option from the main menu, the software attempts to make a connection to
the CMK as shown below. Note: If this is the first time you run CMKConfig, the software will prompt the user for the
computer's MIDI configuration. See 'MIDI I/O Setup' on page 45.
Figure 24: CMKConfig software attempting to connect with the CMK
If a connection is not made, the following window appears:
Figure 25: CMKConfig software unable to connect
If a connection is made, the CMKConfig software will indicate the number of keyboards connected.
Figure 26: CMKConfig software successfully connected to the CMK.
_________________________________________________________________________________________________________
Page-38
CMK-1 Manual (Issue-1) October 20, 2004