Figure 38: Successful Connection Between Cmk And Pc Software - Classic Organ Works CMK-1 User Manual

A window will then appear and the program will read the DIP switch to get the configuration number
(see table 12 in Appendix A for DIP switch codes). The user may change the configuration number to
be loaded if desired.
After the user has the desired configuration number, pressing 'OK' will display a window to confirm
the selection:
•
Write Program Data to CMK – Saves a configuration file to the CMK memory chip. Typical CMK
units will have numerous configuration files so the user should specify the configuration number of
the current file.
Icon: Keyboard shortcut: Ctrl+W
To save a configuration to the CMK, go to File → Write Program Data to CMK or, use the keyboard
shortcut or icon as shown above. The Software attempts to make a connection to the CMK.
_________________________________________________________________________________________________________
CMK-1 Manual (Issue-1)

Figure 38: Successful connection between CMK and PC software

Figure 39: Confirms loading of configuration into CMKConfig software.
Figure 40: Software attempting to communicate with CMK
Page-44
October 20, 2004