Installation - Intelligent Weighing Technology MII-600 Operation Manual

1.

INSTALLATION

1.1 Check to make sure that the following items are
included:
This operation manual
Scale x 1
Stainless steel platter cover x 1
Power adapter x 1
Contact your dealer if any items are missing.
1.2 Insert the legs of the plastic platter carefully into the
holes on top of the scale, then place the stainless steel
platter on top.
1.3 Power the Scale
a. Insert one 9V battery into the battery pack
underneath the scale, or
b. Connect the power adapter. Before plugging the
power adapter into electricity outlet, check to make sure
that the input voltage of the power adapter matches the
output voltage of the outlet. If not, do not plug in the
adapter. Contact your dealer immediately.
CAUTION:
When the power adapter is being used, take the battery
out from the battery pack. Failure to do so may cause
battery leak / explosion or damage to the scale. Do not
use any rechargeable battery. The scale does not
recharge any battery.
1.4 Retain the packing materials for future transportation
use.