Marquis MQHBZDV3636 Instruction Manual page 42

MQROCK1/MQRSP1 Setup for Models MQHBZDV4736
STEP 1: Remove the back log holder, log supports, and the grate
bar. Replace/reinstall the 2 screws from the grate bar.
Glass or Silicon Sand
Lava Rock Shown
STEP 3: Fill around the rock platform with lava rock. Sprinkle
vermiculite over top of the lava rock. Do not place lava rock or
vermiculite on top of the burner tube.
PARTS LIST: Rock #1 - 5 pieces; Rock #3 - 6 pieces;
Rock #4 - 10 pieces; Rock #6 - 9 pieces.
STEP 2: Attach the back rock support using the existing screws
from the back log holder. Using the platform mount access
holes, attach the rock platform as shown.
STEP 4: Place rocks #1 onto the burner as shown. Do not
place rocks directly onto the burner tubes.
42