GRAUPNER ULTRAMAT AC/DC EQ Operating Instructions Manual page 8

◎ MEMORY SETUP
ULTRAMAT AC/DC EQ has 10 memories
It is used to store specific battery, charge, discharge and safety parameters, as well as
being used to initiate charging, discharging, cycling/store mode functions
① Press ENTER button then the memory number blinks. Press INC/DEC buttons to select
the memory number.
Pofile
LiPo
② Press ENTER button then BATTERY TYPE blinks. Press INC/DEC buttons to select
battery type.
Pofile
LiPo
③ Press ENTER button then battery cell blinks. Press INC/DEC buttons to set battery cell.
Pofile
LiPo
④ Press ENTER button and INC/DEC buttons to set battery capacity.
Pofile
LiPo
⑤ Press ENTER button to remove the curser blinking.
Pofile
LiPo
⑥ Press INC/DEC buttons to set charge current and charge voltage and then press EN-
TER button to remove the curser blinking.
LiPo
C=3.0A
⑦ Press INC button to access to DISCHARGE mode and press INC/DEC buttons to set
discharge current and discharge voltage and then press ENTER button to remove the
curser blinking.
LiPo DISCHARGE
D=1.0A
8
ULTRAMAT AC/DC EQ
[01]
6S
3000
[01]
6S
3000
[01]
6S
3000
[01]
6S
3000
[01]
6S
3000
CHARGE
4.2V/C
3.0V/C