GRAUPNER ULTRAMAT AC/DC EQ Operating Instructions Manual page 11

⑤ Press ENTER button shortly then the value of charge current blinks, press DEC/INC
buttons to set the desired value of charge current
Nixx CYCLE C->D1
C=3.0A
⑥ Press ENTER button shortly then the value of discharge current blinks, press DEC/
INC buttons to set the desired value of discharge current
Nixx CYCLE C->D1
C=3.0A
⑦ Press and hold ENTER button for more than 1sec to start charge cycle
BATTERY
PLEASE
◎ LiPo, LiIon, LiFe BATTERIES CHARGE/DISCHARGE
- LiPo charge ( ex : LiPo 7.4V, 5000mAh )
① Set the battery type, cell, capacity at MEMORY mode
Profile
LiPo
② Press INC button to access to LiPo CHARGE mode
LiPo
C=3.0A
③ Press ENTER button shortly then the value of charge current blinks, press DEC/INC
buttons to set the desired charge current
LiPo
C=6.0A
④ Press ENTER button shortly then the value of cell voltage blinks, press DEC/INC but-
tons to set the desired cell voltage
LiPo
C=6.0A
⑤ Press and hold ENTER button to start to charge battery
BATTERY
PLEASE
D=1.0A
D=1.0A
CHECK
WAIT....
[02]
2S 5000
CHARGE
4.20V/C
CHARGE
4.20V/C
CHARGE
4.20V/C
CHECK
WAIT....
ULTRAMAT AC/DC EQ
11