GRAUPNER ULTRAMAT AC/DC EQ Operating Instructions Manual page 13

- LiPo cycle
① Press INC button to access to LiPo CYCLE mode from LiPo DISCHARGE mode
LiPo CYCLE C->D1
C=6.0A
② Press ENTER button then the sequence of cycle blinks, press DEC/INC buttons to
set the desired sequence of cycle
LiPo CYCLE C->D1
C=6.0A
※ D->C : Discharge to Charge C->D : Charge to Discharge
③ Press ENTER button then the number of cycle blinks, press DEC/INC buttons to set
the desired number of cycle
LiPo CYCLE C->D1
C=6.0A
④ Press ENTER button shortly then the value of charge current blinks, press DEC/INC
buttons to set the desired value of charge current
LiPo CYCLE C->D1
C=6.0A
⑤ Press ENTER button shortly then the value of discharge current blinks, press DEC/
INC buttons to set the desired value of discharge current
LiPo CYCLE C->D1
C=6.0A
⑥ Press ENTER button to start charge cycle
BATTERY
PLEASE
- LiPo store
① Press INC button to access to LiPo STORE mode from LiPo DISCHARGE mode
LiPo
C=6.0A
D=1.0A
D=1.0A
D=1.0A
D=1.0A
D=1.0A
CHECK
WAIT....
STORE
D=1.0A
ULTRAMAT AC/DC EQ
13