Important Information For Installation - Yale Doorman User Manual

Important information for installation

To check during installation
• Be careful when sliding the lock case into the hole in the
door so that no cable is squeezed or cut by the lock case.
• Assure the handle can retract the hook bolt before faste-
ning the product and closing the door. The square pin on
the handle must have the correct length that corresponds
to the door thickness. The square pin is flexible in lenght by
a spring for easy installation but if still not correct length you
can exchange the pin to a longer or shorter one. Too short
spindle can result in that you cannot open the door and
to long can result in malfunction of the product since the
handle cannot move easily.
54
To check after installation
• Check that the thumb turn locks and unlocks properly and
check that you can turn the thumbturn to horizontal position in
the opening direction. If any of these is not working correctly you
have not put the right/left switch and/or the right/left screw in
correct position. This switch and screw is located on the back
side of the inside (see Installation manual).
• Check that the handle can move easily and when releasing the
handle it should return to horizontal position easily. If this is not
the case, please check the length of the square pin and if the
product is assembled straight on the door since this can cause
malfunction of the product.
• Check that all codes and keytags and remotes (option) works
correctly.
• Make sure all users know about the battery back up possibility.