Resetting All Remote Control Codes - Yamaha HTR-6063 Owner's Manual

MAIN ZONE 2
CODE SET o
RECEIVER
SOURCE q
4 Enter a remote control code "2064" using
HDMI
d
mNumeric
1 2 3 4
AUDIO
5 V-AUX 1 2
AV
1 2 3 4 2
5 6 MULTI DOCK
Once the remote control code is registered successfully
TUNER PHONO
q
SOURCE/RECEIVER
FM AM
PRESET TUNING
Registration successful: blinks twice
INFO MEMORY
Registration failed: blinks 6 times
ENHANCER SUR. DECODE
MOVIE MUSIC
SLEEP STRAIGHT PURE DIRECT
SCENE
i
BD
TV CD RADIO
DVD
OPTION
ON SCREEN
ENTER VOLUME
RETURN
DISPLAY
• If the registration fails, repeat from step 2.
TOP
POP-UP
MUTE • In case of an external component with multiple remote
MENU MENU
control codes, the other remote control codes may be
REC
supported. Repeat from step 2 with the other remote
control codes.
1 2 3 4
m
5 6 7 8
9 0 10 ENT
5 To switch between BD player linked to
INPUT
scene selections, press
MUTE
same time press
approximately 3 seconds.
Then you can operate the external components by
d switching the input source to HDMI2, or selecting
HDMI2
i HDMI2 in the registered scene.
SCENE
m
Numeric keys
Same steps for operating other external components,
o
CODE SET
i
SCENE
press
q
SOURCE/RECEIVER
source key selected in step 3 and hold it for
approximately 3 seconds.
J
1 : When you want to register a remote control code to the
n
TV control
J1
keys.
0 6 4
will blink twice.
ZONE 2
CODE SET
SOURCE RECEIVER
HDMI
1 2 3 4
iSCENE
and at the
dHDMI2 and hold it for
and at the same time press the input
keys, enter the TV remote control code in step 4.

Resetting all remote control codes

Resetting all remote control codes for external
components to the initial factory settings.
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 1.
oCODE SET
1 Press using a pointed object
such as the tip of a ballpoint pen.
blinks twice
ZONE 2
CODE SET
SOURCE RECEIVER
HDMI
1 2 3 4
qSOURCE/RECEIVER
2 Press on the remote
control.
SETUP
Controlling other components with the remote control
mNumeric
3 Enter "9981" using
9 9 8
Once the remote control code is reset successfully
qSOURCE/RECEIVER
will blink twice.
Reset successful: blinks twice
Reset failed: blinks 6 times
ZONE 2
CODE SET
SOURCE RECEIVER
HDMI
1 2 3
If setup fails, repeat from step 1.
keys.
1
4
91
En