Using Bluetooth™ Components - Yamaha HTR-6063 Owner's Manual

MAIN ZONE 2
CODE SET
RECEIVER
SOURCE
5 Make sure the Bluetooth component
HDMI
recognizes the Bluetooth wireless audio
1 2 3 4
AUDIO
receiver.
5 V-AUX 1 2
AV
When the device is recognized, it will appear in the
1 2 3 4
Bluetooth component list, for example as "YBA-10
d
5 6 MULTI DOCK
YAMAHA."
TUNER PHONO
FM AM
PRESET TUNING 6 Select the Bluetooth wireless audio receiver
INFO MEMORY
from the Bluetooth component list, and
ENHANCER SUR. DECODE
MOVIE MUSIC enter a pass key "0000" into the Bluetooth
SLEEP STRAIGHT PURE DIRECT
component.
SCENE
BD
TV CD RADIO
DVD
OPTION
ON SCREEN r DOCK
Completed
k
ENTER VOLUME
RETURN
DISPLAY
TOP
POP-UP
MUTE
MENU MENU
REC
1 2 3 4
5 6 7 8
9 0 10 ENT
INPUT
MUTE
d
DOCK
k
Cursor B / C
k
ENTER
r
OPTION
J
1 : Depending on Bluetooth components, wireless connection is
carried out right after the pairing. In this case, "BT connected" is
displayed instead of "Completed."
J
2 : "Disconnect" is displayed when a Bluetooth component has been
connected.
J1
When pairing occurs correctly
VOL.
SW
C
L R
SL SR
SBL SBR
Using Bluetooth™ components
When pairing is complete, perform the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component. When the wireless
connection is complete, Bluetooth components can be
played back.
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
Press dDOCK to switch to the DOCK input.
1
rOPTION
Press to display the OPTION
2
menu.
PLAYBACK
Playing back tunes from Bluetooth™ components
kCursor B / C
3 Use to select "Connect" and
J2
press kENTER.
When wireless connection is complete
DOCK
BT connected
"Not found" is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 10 m of the
Bluetooth wireless audio receiver.
Operate the Bluetooth component for
4
playback.
To disconnect a wireless connection, repeat the same
steps, and in step 3, select "Disconnect."
VOL.
SW
C
L R
SL SR
SBL SBR
64
En