Yamaha HTR-6063 Owner's Manual page 43

■
Enjoying sound programs without
surround sound speakers
This unit allows you to use virtual surround speakers to enjoy
sound field surround effects, even without any surround speakers
(Virtual CINEMA DSP mode). You can even enjoy surround sound
presence with just a minimal configuration of the front speakers
only.
This unit will switch to Virtual CINEMA DSP mode automatically
J1
when surround speakers are unavailable.
■
Enjoying sound programs with
headphones
Even when headphones are connected, you can enjoy the
reproduction sound field presence with ease (SILENT CINEMA
J2
mode).
J
1 : However, Virtual CINEMA DSP mode is not available under the following
conditions:
• When headphones are connected to this unit.
• When a "7ch Stereo" or "2ch Stereo" sound program is selected.
• When Pure Direct mode or straight decoding mode is selected.
■
Enjoying more spatial sound fields
(CINEMA DSP 3D mode)
CINEMA DSP 3D mode creates an intensive and accurate
stereoscopic sound field in the listening room.
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP 3D mode. Do the
following steps and then select a CINEMA DSP sound program
J3
(☞p. 45).
• Connect the presence speakers to the EXTRA SP jacks
• Set "Front Presence" to "Use"
(☞p. 78).
• Set "Power Amp Assign" to "7ch Normal"(☞p.
• Enable CINEMA DSP 3D in the OPTION menu
When a sound program runs in CINEMA DSP 3D mode, the
CINEMA DSP 3D indicator on the front panel lights up.
Lights up
MUSIC
3
Hall in Vienna
J
2 : However, SILENT CINEMA mode is not available under the following
conditions:
• When a "2ch Stereo" sound program is selected.
• When Pure Direct mode or straight decoding mode is selected.
■
Enjoying sound programs without
presence speakers
This unit allows you to use virtual presence speakers to create an
intensive and accurate stereoscopic sound field, even when no
presence speakers are connected (Virtual CINEMA DSP 3D
mode). You can even enjoy surround sound presence with front
speakers, center speaker, and surround speakers.
This unit automatically switches to Virtual CINEMA DSP 3D
(☞p. 17). mode when presence speakers are not available.
Do the following steps and then select a CINEMA DSP sound
77). program (☞p. 45).
(☞p. 50). • Connect the front speakers, center speaker, and surround speakers.
• Enable center speaker and surround speakers in "Configuration"
(☞p. 78
).
• Enable CINEMA DSP 3D in the OPTION menu
VOL.
SW
PL PR
C
R
L
SL SR
J
3 : However, CINEMA DSP 3D mode is not available under the following
conditions:
• When headphones are connected to this unit.
• When a "7ch Stereo" or "2ch Stereo" sound program is selected.
• When Pure Direct mode or straight decoding mode is selected.
PLAYBACK
Enjoying the desired sound field effect
(☞p. 50).
43
En