Connecting Speakers And Subwoofer - Yamaha HTR-6063 Owner's Manual

Connecting speakers and subwoofer

Connect your speakers to their respective terminals on the rear panel.
CAUTION
• Remove the AC power cable of this unit from the power outlet before connecting the speakers.
• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the "+"
(positive, red) terminal on this unit and the speakers, and the other cable into the "–" (negative, black) terminal.
• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, "CHECK SP
WIRES!" will appear on the front panel display when this unit is switched on.
■ Front/Center/Surround/Surround back speaker and
Subwoofer connection
Front speaker Surround
speaker
R L
R
HDMI 2 HDMI 3 HDMI 4 HDMI 5
SPEAKERS
FRONT CENTER SURROUND SURROUND BACK/BI-AMP
MOTE
+12V
0.1A MAX.
GER OUT
CENTER SINGLE
ND SUR.BACK SUBWOOFER AUDIO ZONE2 FRONT SURROUND SUR.BACK
OUT OUT PRE OUT
Center speaker Subwoofer
■ Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP jacks as shown in the diagram below.
Surround back
speaker
L R L
SINGLE
CENTER
1 OOFER 2
Presence Presence
speaker R speaker L
EXTRA SP
ZONE2/
PRESENCE
ARC
HDMI OUT (BD/DVD)
DOCK HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
PHONO ANTENNA SPEAKERS
COMPONENT FRONT CENTER SURROUND SURROUND BACK/BI-AMP
COMPONENT VIDEO
VIDEO
FM GND AM REMOTE
P P
R R IN
SINGLE
GND
75 OUT EXTRA SP
P B P B
PRESENCE ZONE2/
VIDEO VIDEO
Y Y +12V
0.1A MAX.
MONITOR OUT TRIGGER OUT
CENTER SINGLE CENTER
OPTICAL COAXIAL COAXIAL OPTICAL FRONT SURROUND SUR.BACK 1 SUBWOOFER 2
(CD) ( TV ) AV FRONT SURROUND SUR.BACK SUBWOOFER AUDIO ZONE2
OUT OUT OUT PRE OUT
CONNECTIONS
Connecting speakers
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs
sound with a richer and more spatial presence can be created.
0.5 – 1 m 0.5 – 1 m
PL
FL
1.8 m
• Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
• Although you can connect both surround back speakers and
presence speakers to this unit, you cannot output sounds from
those speakers at the same time.
(☞p. 45),
PR
FR
1.8 m
Continues to the
next page
17
En