Vivotek FD8167 User Manual page 75

NOTE:
NOTE
► If the default ports are already used by other devices connected to the same router, the Network
Camera will select other ports for the Network Camera
► If UPnP TM is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
► Steps to enable the UPnP
Note that you must log on to the computer as a system administrator to install the UPnP
components
1 Go to Start, click Control Panel, then click Add or Remove Programs
2 In the Add or Remove Programs dialog box, click Add/Remove Windows Components
3 In the Windows Components Wizard dialog box, select Networking Services and click
Details
TM
user interface on your computer:
VIVOTEK
TM
User's Manual - 75