Vivotek FD8167 User Manual page 74

Fixed dome network camera 2mp • 30m ir • smart ir • smart stream • 3dnr • p-iris 2mp • 30m ir • ip66 • smart ir • smart stream• 3dnr • p-iris
Hide thumbs Also See for FD8167:
Table of Contents

Advertisement

VIVOTEK
Primary DNS: The primary domain name server that translates hostnames into IP addresses.
Secondary DNS: Secondary domain name server that backups the Primary DNS.
Primary WINS server: The primary WINS server that maintains the database of computer names
and IP addresses
Secondary WINS server: The secondary WINS server that maintains the database of computer
names and IP addresses
Enable UPnP presentation: Select this option to enable UPnP
Camera so that whenever a Network Camera is presented to the LAN, shortcuts of connected
Network Cameras will be listed in My Network Places You can click the shortcut to link to the web
browser Currently, UPnP
please make sure the UPnP
Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option
to allow the Network Camera to open ports automatically on the router so that video streams can
be sent out from a LAN To utilize of this feature, make sure that your router supports UPnP
it is activated
PPPoE (Point-to-point over Ethernet)
Select this option to configure your Network Camera to make it accessible from anywhere as long
as there is an Internet connection Note that to utilize this feature, it requires an account provided
by your ISP
Follow the steps below to acquire your Network Camera's public IP address
1 Set up the Network Camera on the LAN
2. Go to Configuration > Event > Event settings > Add server (please refer to Add server on page
111) to add a new email or FTP server
3. Go to Configuration > Event > Event settings > Add media (please refer to Add media on page
116)
Select System log so that you will receive the system log in TXT file format which contains the
Network Camera's public IP address in your email or on the FTP server
4. Go to Configuration > Network > General settings > Network type. Select PPPoE and enter the
user name and password provided by your ISP Click Save to enable the setting
5 The Network Camera will reboot
6 Disconnect the power to the Network Camera; remove it from the LAN environment
74 - User's Manual
TM
is supported by Windows XP or later Note that to utilize this feature,
TM
component is installed on your computer
TM
presentation for your Network
Mega-pixel Network Camera (192.168.5.151)
TM
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fd8167-tFd8367-vFd8367-vtFd8367

Table of Contents