Table of Contents
Advertisement
VIVOTEK
System > Logs
This section explains how to configure the Network Camera to send the system log to a remote
server as backup
Log server settings
Follow the steps below to set up the remote log:
1 Select Enable remote log
2 In the IP address text box, enter the IP address of the remote server
2 In the port text box, enter the port number of the remote server
3 When completed, click Save to enable the setting
You can configure the Network Camera to send the system log file to a remote server as a log backup.
Before utilizing this feature, it is suggested that the user install a log-recording tool to receive system log
messages from the Network Camera An example is Kiwi Syslog Daemon Visit
http://www.kiwisyslog.
com/kiwi-syslog-daemon-overview/
System log
This column displays the system log in a chronological order The system log is stored in the Network
Camera's buffer area and will be overwritten when reaching a certain limit
46 - User's Manual
Advertisement
Table of Contents
