Table of Contents
Advertisement
VIVOTEK
In the Event settings column, the Servers and Medias you configured will be listed; please make sure the
Event -> Status is indicated as ON, in order to enable the event triggering action
When completed, click Save event to enable the settings and click Close to exit Event Settings page
The new Event / Server settings / Media will appear in the event drop-down list on the Event setting
page
Please see the example of the Event setting page below:
When the Event Status is ON, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail
If you want to stop the event trigger, you can click
ON
to turn it to
OFF
status or click Delete to remove
the event setting
To remove a server setting from the list, select a server name from the drop-down list and click Delete
Note that you can only delete a server setting when it is not applied to an event setting
To remove a media setting from the list, select a media name from the drop-down list and click Delete
Note that you can only delete a media setting when it is not applied to an event setting
User's Manual - 119
Advertisement
Table of Contents
