Using 3Gpp-Compatible Mobile Devices 29 - Vivotek FD8167 User Manual

Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page
19
To utilize this feature, please check the following settings on your Network Camera:
1 Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable
For more information, please refer to RTSP Streaming on page 82
2 As the the bandwidth on 3G networks is limited, you will not be able to use a large video size
Please set the video and audio streaming parameters as listed below
For more information, please refer to Stream settings on page 63
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
3 As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554 For more information, please refer to RTSP Streaming on page 82
4 Launch the player on the 3GPP-compatible mobile devices
5 Type the following URL commands into the player
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream # with small frame size and frame rate>
For example:
You can configure Stream #2 into the suggested stream settings as listed above for live
viewing on a mobile device
MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps
VIVOTEK
User's Manual - 29