Vivotek FD8167 User Manual page 107

Fixed dome network camera 2mp • 30m ir • smart ir • smart stream • 3dnr • p-iris 2mp • 30m ir • ip66 • smart ir • smart stream• 3dnr • p-iris
Hide thumbs Also See for FD8167:
Table of Contents

Advertisement

■ Event name: Enter a name for the event setting.
■ Enable this event: Select this option to enable the event setting.
■ Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher
priority setting will be executed first.
■ Detect next motion detection or digital input after
motion detection after a motion is detected This can prevent event-related actions to be too frequently
performed
1
Schedule
Specify the period of time during which the event trigger will take place Please select the days of the
week and the time in a day (in 24-hr time format) for the event triggering schedule
2 Trigger
This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can
be configured to use the Network Camera's built-in motion detection mechanism or external digital input
devices
There are several choices of trigger sources as shown on next page Select the item to display the
detailed configuration options.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source To enable this
function, you need to configure a Motion Detection Window first. For more information, please refer to
Motion Detection on page 121 for details
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed
■ Digital input
This option allows the Network Camera to use an external digital input device or sensor as a trigger
source Depending on your application, there are many choices of digital input devices on the market
which helps to detect changes in temperature, vibration, sound, and light, etc
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data
seconds: Enter the duration in seconds to pause
VIVOTEK
User's Manual - 107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fd8167-tFd8367-vFd8367-vtFd8367

Table of Contents