Table of Contents
Advertisement
You can click Restore to recall the original settings without incorporating the changes When
completed with the settings on this page, click Save to enable the settings
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to
open the Profile of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode Please manually enter a range of time if you choose Schedule mode Then check Save to
take effect
Please follow the steps below to setup a profile:
1 Check Enable this profile
2. Select the applied mode: Day mode, Night mode,
or Schedule mode Please manually enter a range
of time if you choose Schedule mode
3. Configure Exposure control settings in the folowing
columns Please refer to previous dicussions for
detailed information
4 Click Save to enable the setting and click Close to
exit the page
VIVOTEK
User's Manual - 59
Advertisement
Table of Contents
