Grinder Settings; Cup-Warming Function - Nivona CafeRomatica 720 Operating Instructions And Useful Tips

... 2. Set up
ton (fig. 1/F), "FILL UP PIPE-SYS"
and "TURN VALVE" appear alter-
nately in the display.
Open the steam / hot water con-
trol valve (fig. 1/Q and 7) by turn -
ing knob to the right. The system
now fills up and some water may
come out of the jet (fig. 1/T).
As soon as the "TURN VALVE"
signal reappears, you can turn the
valve control knob (fig. 1/Q and 7)
back to the left to shut.
After the machine has warmed
up, the service button (fig. 1/I)
flashes. The instruction "PLEASE
RINSE" flashes in the display.
Press the service button (fig. 1/I)
and the system is rinsed out via
the coffee spout (fig. 1/J and 5).
The machine is now operational.

2.3 Grinder settings

Caution: Grinder settings can only
be adjusted when the grinder is in
operation. You can adjust the grinder
to suit the roast of your coffee beans.
We recommend that you leave the
grinder on a medium setting.
Open the lid of the bean con -
tainer (fig. 1/N).
Turn the control knob (fig. 1/M
and 3) to the desired position while
the grinder is running. The smaller
the dot, the finer the coffee is
ground.
Downloaded from CoffeeMachineManual.com Manuals
Remember:
· a light roast requires a finer grind
· a dark roast requires a coarser
grind
Try out the different settings to
find the one that best meets your
personal preference.
2.4 Using the cup-warming
function
Your fully automatic coffee centre
CafeRomatica is equipped with a
'passive' cup-warming function –
the operating heat of the machine
is transferred to the cup-warm ing
plate on top of the machine to
warm any cups placed there (only
when the machine is turned on).
Model NICR 740 only: This machine is
equipped with a high-quality 'active' cup-
warming function which can be switched
on and off independently by pressing the
"cup warming" button (fig. 1/L and 10)
on the side of the machine, provided that
the machine is either switched on or in
stand-by mode (the mains supply switch
fig. 1/S must be switched on).
The cup-warming function can be switched
off by pressing the "cup-warming" On / Off
button (fig. 1/L and 10) a second time.
The light in the switch indicates whether
the warming function is switched on or off.
Use the warming function to optimise the
temperature and aroma of your coffee to
suit your personal preference.
9