Drawing Steam - Nivona CafeRomatica 720 Operating Instructions And Useful Tips

... 3. Making coffee

3.7 Drawing steam

Then press the steam warm-up
button (fig. 1/P and 7).
As soon as the system is ready,
"STEAM IS READY" and "TURN
VALVE" appear alternately in the
display.
Hold a container with the liquid
to be heated under the jet (fig. 1/T).
Dip the jet (fig. 1/T) into the
container with the liquid to be
heated.
Make sure that the 'spumatore'
control knob (fig. 11a) is pointing
to the neutral position (steam
symbol).
Turn the steam / hot water valve
control knob (fig. 1/Q and 7) to
the right. Caution: A little water
will come out before the steam.
The operation is completed by
turning the control knob back to
'0' (fig. 1/Q and 7).
Note:
· Steam can be drawn for about
2 minutes. Then the machine will
automatically switch the operation
off. You can prolong the operation
by turning the control knob
(fig. 1/Q and 7) back and forth.
Downloaded from CoffeeMachineManual.com Manuals
· Caution: Risk of scalding!
The steam which comes out is
very hot. Only touch the black
plastic parts of the jet.
· It is hard to remove dried milk
left on the jet after frothing.
There fore clean the equipment as
soon as it has cooled down –
ideally repeat the steam drawing
operation with fresh, cold water
in a cup.
3.8 Frothing milk, hot milk and
cappuccino
With the special 'spumatore' /
frothing device (fig. 1/T and 8)
you can heat up milk straight from
the carton or container and then
froth it into the cup.
Dip the inlet hose (fig. 11f)
straight into the milk carton or
container.
Place a cup under the 'spuma-
tore' jet (fig. 1/T and 8).
Then press the steam warm-up
button (fig. 1/P and 7).
As soon as the system is ready,
"STEAM IS READY" and "TURN
VALVE" appear alternately in the
display screen.
13