Using Pre-Ground Coffee; Drawing Hot Water - Nivona CafeRomatica 720 Operating Instructions And Useful Tips

... 3. Making coffee
Note:
· The brewing operation can be
stopped at any point by pressing
the 1-cup (fig. 1/G) or 2-cup
buttons (fig. 1/H).
· If the water or beans supply runs
out or the trays need emptying
be tween brewing the first cup and
the second, the appropriate mes-
sage will appear in the display and
the second coffee will not be
made. Follow the display screen
and then press the 1-cup button
(fig. 1/G) for the second cup.

3.5 Using pre-ground coffee

First turn the water quantity
control knob (fig. 1/D and 6) to
the desired amount for one cup.
Open the lid of the pre-ground
coffee chamber (fig. 1/O).
Add a level measuring spoon of
ground coffee and close the lid
again. "POWDER READY" appears
in the display.
Place a cup under the coffee
spout (fig. 1/J and 5) and press
the '1-cup' button for one cup
(fig. 1/G).
Note: If the pre-ground coffee
chamber is left open by accident
or the '1-cup' button is not
12
Downloaded from CoffeeMachineManual.com Manuals
pressed after ground coffee is
added, the machine will automati-
cally be rinsed out via the coffee
spout (fig. 1/J and 5) a minute
after the lid is closed. It is then
operational again.
Caution! The pre-ground coffee
chamber is not a storage container.
Never add more than one measure
at a time to the chamber, and use
only fresh or vacuum-packed
coffee ground from beans. Do not
add instant coffee powder!

3.6 Drawing hot water

(e.g. for making tea)
Hold a cup under the jet (fig. 1/T).
Turn the steam / hot water valve
control knob (fig. 1/Q and 7) to
the right. Hot water comes out of
the jet and the display reads
"HOT WATER"
Fill the cup up to the desired
level and turn the valve control
knob (fig. 1/Q and 7) back to '0'.
Caution: Risk of scalding!
Watch out for splashes. The jet
becomes very hot during use.
Leave to cool for a few minutes
before touching, or only touch
the plastic parts.