KCM-5111 Hardware Manual Table of Contents Precautions Introduction Package Contents ................4 Features and Benefits ..............5 Safety Instructions ................6 Physical description ................. 8 Basic Connections ................. 11 Accessing Camera If you have DHCP server / router in your network: ...... 12 If you do NOT have DHCP server / router in your network: ..
KCM-5111 Hardware Manual Precautions Read these instructions You should read all the safety and operating instructions before using this product. Heed all warnings You must adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment.
KCM-5111 Hardware Manual Introduction Package Contents KCM-5111 Product CD *The lens is very stable and does not have focus shifts without screw, so no bundled screw for focus ring of the lens Terminal Blocks for Power & DI/O Accessories Warranty Card *For the mounting block, please attach it flat side to the front of camera.
KCM-5111 Hardware Manual Features and Benefits This is a cutting edge network video surveillance camera. It can capture, compress and transmit real time video in excellent quality (8 FPS 4Megapixel, 2032 x 1920). This camera is your best choice to build an intelligent IP surveillance system.
KCM-5111 Hardware Manual Software Development Kit Support This IP Box Camera can be integrated or controlled by applications from third party software developers. Software developers can save considerable efforts by using our Streaming Library or ActiveX control. Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device.
Page 7
KCM-5111 Hardware Manual Damage Requiring service Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions. 1) When the power-supply cord or plug is damaged 2) If liquid has been spilled, or objects have fallen into the video product.
KCM-5111 Hardware Manual Physical description 1) Digital Input / Output Used in applications like motion detection, event triggering, time lapse recording, alarm notifications, etc., the I/O terminal connector provides the interface to: • 2 Transistor Outputs - For connecting external devices such as relays and LEDs.
Page 9
KCM-5111 Hardware Manual 3.3V FUSE 1A DC TO DC CONVERTER POWER INPUT EARTH GND DC POWER RELAY DEVICE DIODE CAMERA 2) P Iris connector P Iris Lens Control Port 3) Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
Page 10
KCM-5111 Hardware Manual 5) Audio Input / Output The IP device supports audio input and output with earphone jack 6) Micro SD / Micro SDHC Card Slot* Insert your Micro SD card here for local recording on camera 7) Power LED This LED light will indicate current camera status.
KCM-5111 Hardware Manual Basic Connections Follow the procedures below to connect the IP device to the respective apparatuses. If you have a PoE(Power over Ethernet) supported switch or injector: 1) Connect your IP Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45 connector.
KCM-5111 Hardware Manual Accessing Camera If you have DHCP server / router in your network: Many network server / routers are able to automatically provide IP addresses through DHCP. If you are using such a network, just plug in your computer and IP Box Cam into the network and your IP device will acquire network address by itself.
Page 13
KCM-5111 Hardware Manual Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: 255.255.255. (NOTE: xxx should be a number from 1 to 254 except 100, which is used by the IP device. Please also...
Page 14
KCM-5111 Hardware Manual If you are using a single camera, this is enough to access the device. If you are using multiple devices, you need to change the current device to another unused IP address, so that when the next device is connected to the network, no two devices use the same IP.
Page 15
KCM-5111 Hardware Manual 10. Click “Apply” 11. Please go to Maintain -> Save & Reboot, and click ”Apply”. Internet Explorer will close after a few seconds. This is normal. 12. Wait for 30 seconds, and open IE again to connect to the IP.