Vision Engineering TIM5 User Manual page 18

4-2 Reflected Light Simplified Polarised Light Observation
1. Set the Analyser and Polariser (Fig. 15).
2. Place the specimen on the stage and adjust the focus by moving the stage up or down. Now simplify the polarised light
3. You can now observe the specimen.
4. Adjust the field iris diaphragm so that the image fills the field of view.
5. You may need to close the aperture iris diaphragm slightly to enhance the contrast.
4-3 Transmitted Light Observation
1. Installing the lamp housing (see page 8: Installing the lamp housing when using transmitted light illuminator).
2. Install objective.
3. Install the swing out condenser.
4. Set the main switch to "II" (ON).
5. Fix the specimen on the stage; adjust the focus then you may begin the observation.
17