Subscribe to Our Youtube Channel
Related Manuals for Vision Engineering EVO Cam
Summary of Contents for Vision Engineering EVO Cam
- Page 1 User Guide EVO Cam digital microscope § Multi-axis stand § Ergo stand FM 557119 Vision Engineering been certified for the quality management system ISO 9001:2008.
-
Page 2: Evo Cam
PREFACE System serial numbers Unit type Serial number EVO Cam Multi-axis stand Ergo stand Focus assembly Transmitted substage illumination module (option) EVO Cam On the rear of the unit. Multi-axis stand On the rear of the stand mechanism. Ergo stand... -
Page 3: Focus Assembly
Focus assembly On the rear of the unit. Transmitted substage illumination module (option) On the underside of the module. -
Page 4: Copyright
We have compiled the texts and illustrations as accurately as possible. However, Vision Engineering Ltd. will not be responsible for the accuracy of the information contained in this document, which is used at your own risk and should not be relied upon. -
Page 5: Table Of Contents
Warning! Warning of electrical shock hazard MAINTENANCE Important information Troubleshooting Health & safety Changing the output frame rate Electrical safety Taking care of your evo cam Illumination safety Environmental considerations FIRMWARE UPGRADE Operator wellbeing Compliance statements Firmware upgrade SYSTEM DIAGRAM... -
Page 6: General
Servicing performance. This could include: Optimal arrangement Repairs may only be carried out by Vision Engineering- of workplace; Variation in task activity; Training of trained service personnel. -
Page 7: System Diagram
SYSTEM DIAGRAM SYSTEM DIAGRAM Sub-assemblies EVO Cam ECH 002 Control Console ECX150 Objective lenses (see Optical data tables) Optical data Objective Part Magnification Working Field of view Field of view lens number zoom range* distance at min. zoom at max. zoom... -
Page 8: Stand Options
SYSTEM DIAGRAM Stand options Ergo stand with focus Multi-axis stand EVB010 EVB020 Focus assembly Multi-directional EVF111 floating stage EVS120 Transmitted substage illumination EVS011 Objective lenses 2.7x – 27x magnification super-long working distance lens (0.45x), 0.45x EVL045 WD 176mm - supplied secondary ringlight lens to optimise illumination 3.7x –... -
Page 9: Transmitted Substage Illuminator (Option)
Once EVO Cam is installed on the stand (see connect the sub-stage power cable to the EVO Cam. If assembling the optional glare reducing filter, this needs to be placed between the diffuser and the surround. -
Page 10: Stand Mounts
Take care when mounting EVO Cam. Ensure the mounting plate is perpendicular to the base or work bench. -
Page 11: Objective Lens
EVO Cam. The transmitted substage illuminator is an option for use with the Ergo stand. If required, an external ringlight (option) can be used with EVO Cam. Plug the external ringlight into the rear panel connector of EVO Cam. Only... -
Page 12: Operation
OPERATION OPERATION Quick start Power on/off Zoom in Zoom out Image capture Transmitted substage illuminator (option) Overview mode Ringlight illumination control Menu Power on/off - Short press = Power on Image brightness mode - Long press = Power off - Long press to activate image brightness mode Zoom control - Press to increase image brightness - Press to decrease image brightness... -
Page 13: Control Functions
EVO Cam. Hold the Power button in for ~3 seconds to power off EVO Cam. Illumination control The integrated ringlight illumination level can be adjusted by the right hand side buttons... -
Page 14: Magnification
OPERATION Magnification Press the Zoom-In button to enlarge the subject within the image and Zoom-Out button to reduce the subject size within the image. The unit will make a sound to indicate when it has reached maximum or minimum zoom limits. Magnification level OSD (On Screen Display) The current magnification level is displayed for example... -
Page 15: Factory Defaults
OPERATION Factory defaults To restore EVO Cam to it’s factory settings follow the procedure below: Ensure EVO Cam is turned off. Press and hold the power and Menu buttons until 4 beeps are heard. EVO Cam will then turn on and display default information. - Page 16 Field and ‘av’ is short for All-round View Select between manual and auto focus modes. When Unit: Metric / Imperial manual focus is selected EVO Cam’s internal focus is fixed - use focus control on the microscope stand to Select the units for cursor and grid measurements.
-
Page 17: Using The Control Console (Optional)
OPERATION Using the control console (optional) An optional control console can be used with EVO Cam which allows many of EVO Cam’s controls to be operated remotely. The control console can also be used to navigate EVO Cam’s menu and select items. -
Page 18: Maintenance
HD signals, however some cannot. If your monitor/TV does not display the image from the EVO Cam you should try the following: ensure EVO Cam is turned off. Press and hold the Overview and power buttons until 4 quick beeps are heard. This will change between 50Hz and 60Hz modes and display the selected frequency. -
Page 19: Firmware Upgrade
FIRMWARE UPGRADE Firmware upgrade Lighting controller firmware update EVO Cam includes a Firmware Upgrade Function In addition to the standard upgrade, the light control allowing users to install new versions of the firmware. can be upgraded with new firmware. To upgrade the light control firmware: Make a directory called “Upgrade”... -
Page 20: Specification
SPECIFICATION SPECIFICATION Camera resolution: HD 1080p, 1920x1080 at 50/60 Hz Monitor connections: HDMI Monitor requirements: HD ready or full HD (recommended) Outputs: HDMI Image capture: USB 2.0 High-speed Dimensions: 11 x 16.5 x 14 cm (w x h x d) Power: Max. -
Page 21: Servicing
SERVICING SERVICING Service record Date of next Service Comments Date of service Company Signature service... -
Page 23: Warranty
Vision Engineering. Except as stated herein, Vision Engineering makes no other warranties, express or implied by law, whether for resale, fitness for a particular purpose or otherwise. Further, Vision Engineering shall not under any circumstances be liable for... - Page 24 +81 (0) 45 935 1117 Email: info@visioneng.jp Disclaimer – Vision Engineering Ltd. has a policy of continuous development and reserves the right to change or update, without notice, the design, materials or specification of any products, the information contained within this brochure/datasheet and to discontinue production or distribution of any of the products described.
Need help?
Do you have a question about the EVO Cam and is the answer not in the manual?
Questions and answers