Table of Contents
Advertisement
Figure 12 Engaging the scissor-type locking latches
3.
Slide the back end of the rack rail into the inside rear column of the rack, making sure that the pins
extend through the U-holes marked in
(Figure
13).
Figure 13 Inserting the rail into the rear rack column
4.
Locate the shipping bracket on the rail
5.
Use a No. 2 Phillips screwdriver to loosen the shipping bracket and slide the bracket toward the
back of the rack.
6.
Install the other rail by repeating
28
Installation
CXO8195A
Step
1, and the scissor-type locking latch is fully engaged
CXO8196A
(Figure
14).
Step 1
through
Step
5.
Advertisement
Table of Contents
