Ds2500 Physical Specifications; Environmental Operating Specifications; A Specifications - HP StorageWorks 2500 User Manual

A Specifications
This appendix defines the physical, environmental, and power specifications of the DS2500 components.
Physical specifications
This section describes the physical specifications of the DS2500.
Table 14 lists the dimensions and weights of the enclosure.
Table 14 DS2500 physical specifications
Height
Width
Depth
Weight
NOTE: Metric dimensions are expressed in whole numbers. For example, 10.795 cm is expressed as 108
mm. Millimeter dimensions are always expressed in whole numbers.
WARNING!
An assembled enclosure (all components installed) weighs more than 29.5 kg (65 lb) and requires a
minimum of two individuals to move.
Environmental specifications
To ensure optimum product operation, you must maintain the operational environmental specifications
listed in Table
critical.
Table 15 Environmental operating specifications
Ambient temperature: +10°C to +35°C (+50°F to +95°F) with an average rate of change of 1°C/hour
maximum, and a step change of 3°C or less.
Maintaining the ambient temperature within the specified range ensures that the internal operating
temperatures support the drive manufacturer's specifications.
Relative humidity: 40% to 60% (noncondensing) with a step change of 10% or less (noncondensing)
Air quality: Not to exceed a maximum of 500,000 particles, 0.5 micron or larger, per cubic foot of air
Heat dissipation: 1600 BTUs per hour
Empty
With components
installed
131 mm 131 mm
(5.16 in) (5.16 in.)
505 mm 505 mm
(19.875 in) (19.875 in.)
448 mm 448 mm
(17.625 in) (17.625 in.)
10.9 kg 30.9 kg
(24 lb) (68 lb)
15. The ambient temperature (the enclosure air intake or room temperature) is especially
Shipping Carton Carton and pallet
641 mm 768 mm
(25.25 in.) (30.25 in.)
318 mm 610 mm
(12.5 in.) (24 in.)
597 mm 1016 mm
(23.5 in.) (40 in.)
43.6 kg 49 kg
(96 lb) (108 lb)
HP StorageWorks 2500 Disk System user guide
65