Fujitsu ETERNUS Multipath Driver V2 User Manual page 19

Release Information
■ V2.0L25 modifications
●
Modification outline
Changed the command so that the offline status is checked for a device when the "iompadm info" com-
mand is executed.
- Modification target
"iompadm" command
- Modification details
V2.0L24 or earlier
V2.0L25
- Modification effect
When performing message monitoring, the newly added message may not be monitored as intended.
Note that this change does not affect the message monitoring function with Fujitsu middleware.
●
Modification outline
The default Max Throttle setting of the ETERNUS DX60/DX60 S2, DX80/DX80 S2, DX90/DX90 S2 is
automated.
- Modification target
Multipath Driver
- Modification details
V2.0L24 or earlier
V2.0L25
- Modification effect
When connecting to the ETERNUS DX60/DX60 S2, DX80/DX80 S2, DX90/DX90 S2, Max Throttle does not
have to be set with the "mpdconfig -m" command.
Version
The offline status is not checked for a device when the "iompadm info" command is
executed.
The offline status is checked for a device when the "iompadm info" command is
executed.
The following syslog message may be output if offline status is detected:
MPDH%d: NOTICE: SCSI%u (%u, %u, %u) : I/O rejection.
number of online paths left for this LUN =%d.
Version
The default Max Throttle value of the ETERNUS DX60/DX60 S2, DX80/DX80 S2, DX90/
DX90 S2 has to be manually specified.
The default Max Throttle value of the ETERNUS DX60/DX60 S2, DX80/DX80 S2, DX90/
DX90 S2 is automatically specified.
FUJITSU Storage ETERNUS Multipath Driver V2 User's Guide for Linux
Copyright 2014 FUJITSU LIMITED
Modification details
Modification details
19
P2U3-0031-15ENZ0