Fujitsu ETERNUS Multipath Driver V2 User Manual page 16

Release Information
■ V2.0L23 modifications
●
Modification outline
Added syslog messages and changed the output timing of syslog messages that are output when starting
up a Red Hat Enterprise Linux 5 or SUSE Linux Enterprise Server 10 system.
- Modification target
Multipath Driver
- Modification details
V2.0L22 or earlier
V2.0L23
- Modification effect
When performing message monitoring, the newly added message may not be monitored as intended.
Note that this change does not affect the message monitoring function with Fujitsu middleware.
Version
The following syslog messages are sequentially output during system startup:
MPDH%d: NOTICE: %s: Device configuration succeeded.
MPDH%d: WARNING: %s: Device configuration is without
redundancy.
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (RT%x, RT%x).
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (CM%x, CM%x).
Note that the following syslog message is output when path redundancy is maintained
regardless of whether the path is recognized or not.
MPDH%d: NOTICE: %s: Device configuration succeeded.
The following syslog messages are sequentially output during system startup:
MPDH%d: NOTICE: %s: Device configuration succeeded.
MPDH%d: WARNING: %s: Device configuration is without
redundancy.
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (RT%x, RT%x).
MPDH%d: NOTICE: %s: Device configuration is without
CFL redundancy.
All paths connect to (CM%x, CM%x).
MPDH%d: WARNING: %s: This path was unrecognizable.
Note that the following syslog message is output when path redundancy is maintained
and all the paths are recognized.
MPDH%d: NOTICE: %s: Device configuration succeeded.
FUJITSU Storage ETERNUS Multipath Driver V2 User's Guide for Linux
Copyright 2014 FUJITSU LIMITED
Modification details
16
P2U3-0031-15ENZ0