Fujitsu ETERNUS Multipath Driver V2 User Manual page 14

Release Information
●
Modification outline
Changed the message that is displayed when the I/O by diagnosis function fails.
- Modification target
Multipath Driver
- Modification details
V2.0L12 or earlier
V2.0L13
- Modification effect
When performing message monitoring, the newly added message may not be monitored as intended.
Note that this change does not affect the message monitoring function with Fujitsu middleware.
■ V2.0L14 modification
●
Modification outline
The initial RAM disk and boot loader settings for an Multipath Driver that is not used any more are
automatically deleted.
- Modification target
Multipath Driver
- Modification details
V2.0L13 or earlier
V2.0L14
- Modification effect
Initial RAM disk settings that are not needed are deleted. The boot loader setting to boot up with this
Initial RAM disk is also deleted.
Version
The following message is displayed when the I/O by diagnosis function fails:
SCSI%u (%u, %u ,%u): incomplete scsi cdb=0x%x - giving
up
The following message is displayed when the I/O by diagnosis function fails:
SCSI%u (%u, %u ,%u): incomplete scsi cdb=0x%x
Version
Does not delete the initial RAM disk and boot loader settings for an Multipath Driver that
will not be used.
Deletes the initial RAM disk and boot loader settings for an Multipath Driver that will not
be used.
FUJITSU Storage ETERNUS Multipath Driver V2 User's Guide for Linux
Copyright 2014 FUJITSU LIMITED
Modification details
Modification details
14
P2U3-0031-15ENZ0