Table of Contents
Advertisement
Chapter 11 Command Reference
11.2 "mpdconfig" Command
-
-c option
# /opt/FJSVmpd/bin/mpdconfig -c
Please wait for searching multipath information ...
No
--------------------------------------------------------------------------------
0
1
--------------------------------------------------------------------------------
This is a list of initrd images including ETERNUS multipath driver.
Please input a number or 'q' for Quit.
INITRD IMAGE FILE
--------------------------------------------------------------------------------
RECOGNITION ORDER:
--------------------------------------------------------------------------------
CURRENT:
NEW
This program remakes the initrd image to apply the device recognition order.
Check the above configuration.
Is the configuration correct?
making backup files
updating modprobe.conf.(/etc/modprobe.conf) ...
creating initrd ...
Remake of the initrd succeeded.
Error messages
This section explains the main error messages and the resolution process.
If any error message other than following appears, contact your Fujitsu engineer.
only root can execute this command.
Cause:
Action:
short of memory.
Cause:
Action:
INITRD INCLUDING MPD
initrd-2.6.18-8.el5-mpd.img
initrd-2.6.18-8.el5-mpd2.img
initrd images that include the Multipath Driver are displayed. If the recognition order
has already been set, storage system information is also displayed
: initrd-2.6.18-8.el5-mpd.img
PRODUCT
FIXED
ETERNUS_DXL
ETERNUS_DXL
:
NOT FIXED
(/etc/modprobe.conf, /boot/initrd-2.6.18-8.el5-mpd.img) ...
A user without the root-level user privilege executed the command.
Execute the command with the root-level user privilege.
Insufficient memory.
Check the memory resources.
FUJITSU Storage ETERNUS Multipath Driver V2 User's Guide for Linux
Copyright 2014 FUJITSU LIMITED
PRODUCT
:
ETERNUS_DXL
ETERNUS_DXL
:
--> 0
Select the initrd for which the specified
recognition order is to be unset
Parenthesized portion is only displayed
if the Multipath Driver is included in multiple initrd
START
SERIAL
LUN_V
130012
0000
130011
0000
y(yes), n(no) --> y
123
START
SERIAL
LUN_V
130012
0000
130011
0000
If everything is correct,
enter "y"
P2U3-0031-15ENZ0
Advertisement
Table of Contents
