Fujitsu ETERNUS Multipath Driver V2 User Manual page 122

Chapter 11 Command Reference
11.2 "mpdconfig" Command
- -s option
# /opt/FJSVmpd/bin/mpdconfig -s
Please wait for searching multipath information ...
LIST OF MULTIPATH DEVICE IN CURRENT DEVICE RECOGNITION ORDER
No
--------------------------------------------------------------------------------
0
1
--------------------------------------------------------------------------------
Please input m(Modify order), a(Accept order) or q(Quit) --> m
Please input space-separated numbers in your request order.(ex. 2 1 0)
or input 'r' to return to the previous menu. --> 1 0
LIST OF MULTIPATH DEVICE IN CURRENT DEVICE RECOGNITION ORDER
No
--------------------------------------------------------------------------------
0
1
--------------------------------------------------------------------------------
Please input m(Modify order), a(Accept order) or q(Quit) --> a
No
--------------------------------------------------------------------------------
0 initrd-2.6.18-8.el5-mpd.img
1 initrd-2.6.18-8.el5-mpd2.img
--------------------------------------------------------------------------------
This is a list of initrd images including ETERNUS multipath driver.
Please input a number or 'q' for Quit.
INITRD IMAGE FILE
--------------------------------------------------------------------------------
RECOGNITION ORDER:
--------------------------------------------------------------------------------
CURRENT:
NEW
This program remakes the initrd image to apply the device recognition order.
Check the above configuration.
Is the configuration correct?
making backup files
updating modprobe.conf.(/etc/modprobe.conf) ...
creating initrd ...
Remake of the initrd succeeded.
The new recognition order is enabled after reboot.
PRODUCT SERIAL
ETERNUS_DXL 130011
ETERNUS_DXL 130012
PRODUCT SERIAL
ETERNUS_DXL 130012
ETERNUS_DXL 130011
INITRD INCLUDING MPD
: initrd-2.6.18-8.el5-mpd.img
PRODUCT
NOT FIXED
: FIXED ETERNUS_DXL
ETERNUS_DXL
(/etc/modprobe.conf, /boot/initrd-2.6.18-8.el5-mpd.img) ...
FUJITSU Storage ETERNUS Multipath Driver V2 User's Guide for Linux
Copyright 2014 FUJITSU LIMITED
START
LUN_V
Storage systems are displayed in the
order in which they are recognized
0000
0000
Enter "m" to change the current recognition order
START
LUN_V
Storage systems are
0000
redisplayed using the new
0000
recognition order
PRODUCT
initrd images that include the
:
Multipath Driver are displayed
:
--> 0
Select the initrd for which the
new recognition order is to be set
Parenthesized portion is only displayed if the
Multipath Driver is included in multiple initrd
START
SERIAL LUN_V
130012 0000
130011 0000
y(yes), n(no) --> y
122
Enter the (blank-delimited)
numbers of the storage
systems, in the desired
order of recognition
If the recognition order
is as desired, enter "a"
START
SERIAL LUN_V
If the specified recognition
order is correct, enter "y"
P2U3-0031-15ENZ0