Toshiba E-Studio 2006 User Manual page 84

3 PRINT FUNCTIONS
Sorting printed documents horizontally and vertically for each copy
 Rotated Sort Copies can be enabled only when printing on Letter, A4, or 16K.
 To make Rotated Sort Copies, sheets to be used must be placed both horizontally and vertically (example: A4 and
A4-R).
1
Display the [Basic] tab menu.
2
Enter the number of copies to be printed at the [Number of Copies] box.
3
Display the [Finishing] tab menu.
4
Select [Rotated Sort] icon at [Copy Handling].
5
Set any other print options you require and click [OK].
6
Click [OK] or [Print] to send the print job.
The printed documents are alternately sorted horizontally and vertically for each copy.
 Printing on both sides of paper
You can print on both sides of paper. Be sure to load the paper, which you specify at step 1, on the bypass tray in advance.
1
Open the [Basic] tab to select the following settings.
 Any paper size other than envelopes from the [Print Paper Size] list. You cannot use envelopes.
 [Plain] from the [Paper Type] list. You cannot use other paper sizes.
2
Open the [Finishing] tab, select the [2-Side Printing] check box, and select the binding
position icon.
Long Edge — Select this to print on both sides of the paper with a margin on the long edge.
Short Edge — Select this to print on both sides of the paper with a margin on the short edge.
3
Set other necessary print options and click [OK].
4
Click [OK] or [Print] to start the print job.
The print job is printed on both sides of paper in the specified direction.
82 Printing With Best Functions for Your Needs