3.PRINT FUNCTIONS
[Configuration] tab
The [Configuration] tab allows you to configure options. When any optional unit is installed in this equipment, set the
configuration of the machine on this tab. The [Configuration] tab can be displayed only from the Printers folder (and not
when displaying the properties from the application's print dialog box).
In order to set the [Configuration] tab, you must access the printer driver properties from the [Devices and Printers]
folder (Windows Vista / Windows Server 2008: [Printer], Windows XP / Windows Server 2003: [Printers and Faxes]).
For detailed instructions on how to set the [Configuration] tab, see the following page:
P.58 "Configuring options manually"
1) Auto Duplexing Unit
Select this check box when the Automatic Duplexing Unit is installed.
2) Drawers
This sets the installation of drawers according to the configuration.
- Drawer 1 — Select this when only Drawer 1 is installed.
- Drawer 1 and Drawer 2 — Select this when Drawers 1 and 2 are installed.
3) [Drawer Settings]
Sets the paper size and paper type of each drawer. The [Drawer Settings] dialog box appears by clicking this.
P.79 "Drawer Settings"
4) [Version Information]
Displays the [Version Information] dialog box.
Drawer Settings
1
3
1) Paper Size
Select the paper size set in each drawer.
2) Paper Type
Select the paper type set in each drawer.
3) [Restore Defaults]
Restores the configuration of this equipment displayed in the [Configuration] tab menu to the original factory defaults.
3 PRINT FUNCTIONS
1
2
3
4
2
Setting Up Print Options
79