Toshiba E-Studio 2006 User Manual page 74

Multifunctional digital systems
Hide thumbs Also See for E-Studio 2006:
Table of Contents

Advertisement

3 PRINT FUNCTIONS
4) Paper Source
Selects a paper source to print a job in the most suitable paper size. The figure on the right indicates the paper size set
for each paper source. When you select a paper source, the chosen one is indicated with a green square in the figure.
- Auto — Automatically selects the paper set in this equipment according to the printed document size.
- Drawer 1 — Paper is fed from the Drawer 1.
- Drawer 2 — Paper is fed from the Drawer 2.
- Bypass Tray — Paper is fed from the Bypass Tray.
The selectable values vary depending on the devices installed in this equipment and their configuration on the
[Configuration] tab.
5) Paper Type
Sets the media type of the paper.
- Plain — Printing on plain paper.
- Thick1 — Printing on thick 1 paper.
- Thick2 — Printing on thick 2 paper.
- Transparency — Printing on transparent sheets.
- Thin — Printing on the back side of thin paper.
 The applicable paper weight for each paper type differs depending on the model. For details of the paper
weight, refer to the corresponding document.
 When [Drawer 1] or [Drawer 2] is selected in the [Paper Source] box, only [Plain] can be chosen in the [Paper
Type] box.
 When [Envelope] is selected in the [Print Paper Size] box, [Envelope] will be displayed and you cannot change
the paper type.
 Setup items differ depending on the model.
6) Number of Copies
Sets the number of printed copies. This can be set at between 1 and 999.
7) Orientation
Sets the paper printing direction.
- Portrait — The document is printed in the portrait direction.
- Landscape — The document is printed in the landscape direction.
72
Setting Up Print Options

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 2306E-studio 2506

Table of Contents