1.PREPARATION
13. USB terminal (4-pin)
Connect to your PC using a commercially available USB cable.
Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed mode (480 Mbps of
transfer speed) certified by the USB Implementers Forum.
Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a USB hub, the
equipment may not be recognized.
14. Scanning area
The data of originals transported from RADF are scanned here.
P.126 "Regular Cleaning"
15. Original scale
Confirm the size of an original placed on the original glass.
1 PREPARATION
Components
11