Add A "Event-Status Change" Channel Type; Add A "Input Pulse Total" Channel Type - Mace HydroMace 3000 Product Manual

21.1.9 Add a "Event-status change" channel type

1. Select the "Event" channel type from the "New
channel" dialogue box and click "Continue".
2. The "Channel name" dialogue box will
appear. Enter a channel "Name" in to the text
field (16 character maximum). This "name" will
also be displayed on the HM 3000 main LCD if
enabled. Click "Continue".
3. In the "New channel" dialogue box highlight
the "I/O Module" option from which the named
channel will receive its value. Click "Continue"
and a new dialogue box will appear with the
available input types listed.
NOte: as a particular module's input becomes fully utilised the module
will not appear on the "Select module" list.
4. Select the "Status change event" type from the
"I/O Module @ 5" list.
5. In this example the channel named "Status
Change" will be calculated using "I/O Module @ 5"
on "Digital input #3". Click "Continue" to complete
the new channel. The "Configure channels" dialogue
box will re-appear with the new channel listed.
NOte: as a particular module's inputs are
utilised the input will not appear on the
"I/O module" list. In the example above, the
"Digital input #3" will no longer be available.
46 SeCtion b SoFtware Manual

21.1.10 Add a "Input pulse total" channel type

1. Select the "Input pulse total" channel type from the
"New channel" dialogue box and click "Continue".
2. The "Channel name" dialogue box will
appear. Enter a channel "Name" in to the text
field (16 character maximum). This "name" will
also be displayed on the HM 3000 main LCD if
enabled. Click "Continue".
3. In the "New channel" dialogue box highlight
the "I/O Module" option from which the named
channel will receive its value. Click "Continue"
and a new dialogue box will appear with the
available input types listed.
NOte: as a particular module's input becomes fully utilised the
module will not appear on the "Select module" list.
4. Select the "Pulse event" type from the "I/O
Module @ 5" list.
5. In this example the channel named "Pulse
Total" will be calculated using "I/O Module @ 5"
on "Digital input #3". Click "Continue" to
complete the new channel. The "Configure
channels" dialogue box will re-appear with the
new channel listed.
NOte: as a particular module's inputs
are utilised the input will not appear
on the "I/O module" list. In the
example above, the "Digital input #3"
will no longer be available.
RetuRn to toC RetuRn to toC MaCe HydRoMaCe 3000 Product Manual 47