Edit A "Total" Channel Type; Edit A "Event - Pulse" Channel Type - Mace HydroMace 3000 Product Manual

21.3.6 Edit a "Total" channel type

Channel name
Decimal places
Flowrate channel
Flow volume units
Channel name
This is the name given to the channel by the user when setup.
NOte: this name will also show on the hM 3000 LCD screen if the Display
channel check box is ticked
Decimal places
The user can set the number of decimal places (0, 1, 2, 3) using the drop down
list box. These decimal places will be shown in both the data file and the LCD.
Display channel
If this check box is ticked then this channel will be displayed on the HM 3000
LCD.
Log channel
If this check box is ticked then this channel will be logged in the data file.
Flow volume units
Select the units from the drop down list box. This sets the units on the logged
value.
Flowrate channel
"Total" is a derived channel type. This field defines from which named
"Flowrate" channel the "Total" is being calculated.
66 SeCtion b SoFtware Manual

21.3.7 Edit a "Event - pulse" channel type

Channel name
Display channel
Event type
Log channel
Channel name
This is the name given to the channel by the user when setup.
NOte: this name will also show on the hM 3000 LCD screen if the
Display channel check box is ticked
event type
This displays the type of event, either "Pulse" or "Status".
Display channel
It is not possible to display an "Event pulse" channel on the HM3000 LCD
display.
Log channel
"Pulse" events are logged in the data file automatically as a "Status message".
NOte: None of these paramaters can be edited
RetuRn to toC RetuRn to toC
Display channel
Log channel
MaCe HydRoMaCe 3000 Product Manual 67