System Information - Mace HydroMace 3000 Product Manual

18.0 System information

From the main menu click "System" and the following menu options will
appear as listed below:
18.1 Set device date/time
The device date and time must be set correctly,
so that data can be accurately matched to
known time intervals.
• The date and time can be set by manual entry
or by synchronizing with the computer time.
• The time is held in 24 hour time.
• Allowance can be made for daylight
savings time.
18.2 Change download password
The download password allows low level access
to the device. When this password is used for
entry to the device, channel totals may be
viewed and data can be downloaded.
Many irrigation districts give this password
to irrigators to allow them to use the data for
water management operations.
30 SeCtion b SoFtware Manual
18.3 Change super password
The super password allows high level access
to the device. When this password is used
for entry to the device, all editing functions
(including data downloading) are allowed.
Most irrigation districts set this password to
prevent non authorized access to the device.
Both the super and download
passwords are case sensitive.
18.4 System settings
The system settings function allows the
user to change the measurement units from
metric to U.S and vice versa.
18.5 Clear stored data
This function should only be used by high
level users. It clears all stored data from the
device including all time stamped data.
18.6 Module check
This function provides the user with a simple
method of identifying the FloSeries3 modules
which are currently installed in the device.
RetuRn to toC RetuRn to toC MaCe HydRoMaCe 3000 Product Manual 31