Electronics Module - Mace HydroMace 3000 Product Manual

4.0 electronics module

The electronics module is the central processing unit of the HydroMace 3000.
It includes the enclosure, battery and circuit boards that control the device.
On the front of the HydroMace 3000, a backlit liquid crystal display (LCD)
allows the user an on-site readout of parameter values and status messages.
Pressing either membrane switch will turn on the LCD.
The membrane switches can be used to scroll the display between the
various parameters being measured.
A serial communications port is located on the bottom face of the main
enclosure. Using the MACE serial data cable (Part No. 891-300) between this
port and a PC, users can configure, troubleshoot and download the device.
ELECTRONICS MODULE - FRONT
Secure Latch
with Padlock
Hole
Membrane Switches
(scrolls the display up & down)
8 SeCtion a Hardware Manual
Controller Module (slot 0)
Input/Output Module (slot 1)
LCD Display
External Battery Input
12VDC
(Charged by Series3 Device)
Serial Communications Port
RetuRn to toC RetuRn to toC
ELECTRONICS MODULE - INSIDE
Bracket
Serial Communications Port
NOTE: Door not shown
ELECTRONICS MODULE - UNDERSIDE
12v Battery
Module Slots 2-5
Charger Input
16-30VDC
(Centre of jack
is positive)
Solar Panel/Charger
Input 16-30VDC
(Use with Solar Panel
or Mains Plug Pack)
Pole Cable Entry Point
Conduit Cable Entry Point
MaCe HydRoMaCe 3000 Product Manual 9