Edit A "Flowrate (Weir)" Channel Type - Mace HydroMace 3000 Product Manual

21.3.5 Edit a "Flowrate (Weir)" channel type

21.3.5.1 Flowrate (Weir): Rectangular and Cipoletti weirs
Channel name
Decimal places
Weir type
Depth channel
Flowrate units
Flume width
Channel name
This is the name given to the channel by the user when setup.
NOte: this name will also show on the hM 3000 LCD screen if the
Display channel check box is ticked
Decimal places
The user can set the number of decimal places (0, 1, 2, 3) using the drop down
list box. These decimal places will be shown in both the data file and the LCD.
Display channel
If this check box is ticked then this channel will be displayed on the HM 3000
LCD.
Log channel
If this check box is ticked then this channel will be logged in the data file.
Weir type
The weir type selected when the channel was added.
Depth channel
The depth channel selected for the weir calculation when the channel was
added.
Flowrate units
Select the units and the timebase from the drop down list boxes. This sets the
units on the logged value.
Flume width
Enter the width of the weir in the units shown. The units are defined according
to the "System settings".
62 SeCtion b SoFtware Manual
21.3.5.2 Flowrate (Weir): V-Notch weirs (30˚, 45˚, 60˚, 90˚)
Display channel
Channel name
Log channel
Decimal places
Weir type
Depth channel
Flowrate units
Channel name
This is the name given to the channel by the user when setup.
NOte: this name will also show on the hM 3000 LCD screen if the
Display channel check box is ticked
Decimal places
The user can set the number of decimal places (0, 1, 2, 3) using the drop down
list box. These decimal places will be shown in both the data file and the LCD.
Display channel
If this check box is ticked then this channel will be displayed on the HM 3000
LCD.
Log channel
If this check box is ticked then this channel will be logged in the data file.
Weir type
The weir type selected when the channel was added.
Depth channel
The depth channel selected for the weir calculation when the channel was
added.
Flowrate units
Select the units and the timebase from the drop down list boxes. This sets the
units on the logged value.
RetuRn to toC RetuRn to toC
Display channel
Log channel
MaCe HydRoMaCe 3000 Product Manual 63