Using The Call Park Feature - Avaya 1120E IP User Manual

While on an active call

Using the Call Park feature

You can use the Call Park feature to temporarily park a call so that you or
another user can retrieve the parked call from another phone. Using Call
Park does not tie up a line, because the call is held on the IP Office call
server.
To park a call:
Feature
Park
168
1. Press the Feature
2. Enter 74 on the keypad.
3. Press the Enter
center of the navigation key.
The deskphone displays the following
prompt: PrkOn:>
4. Using the key pad, enter an ID for the
parked call. Enter an ID that is up to 9
digits in length. You will need to enter
this ID when you retrieve the call from
park.
5. Press the Enter
Note: If there is currently an active
called parked that uses the same ID as
the one you have entered, the
deskphone displays Forbidden. Enter a
new ID.
soft key.
key, located in the
key.