Network Setup - LG LE2104 Owner's Manual

Schedule Copy Settings
1. Select the source day to copy.
2. Select the destination day from the day of
the week, weekday or weekend options.
3. Click the copy button to copy the schedule data.
Special day Settings
1. Mark up the special day option.
2. Select the date to set the special day schedule.
3. Mark up the desired recording option.
4. Select the channel to set the schedule.
5. Click the start time cell block and drag & drop to select
a time period cell block.
or
Click the start time cell block of a channel and drag &
drop across the channels to select the time period block
for multi channel setting at the same time.
The color of the cell block will change.
6. Enter the name of the special day.
7. Click the add button to add the special day settings.
The special day is added to the list.
If you want to cancel the registered special day, select
the special day in the list and click the delete button.
52
Event setup
1. Set the event options.
• Sensor: Displays the number of the ALARM-IN ter-
minal.
• Sensor Type: The alarm state can be set to either
N.O. (Normally Open) or N.C. (Normally Closed).
• Linked Camera: Select the connected camera chan-
nel with the ALARM-IN terminal.
• Relay Output: Select the alarm output number of
the RELAY-OUT terminal for the output alarm signal.
2. Setting [Etc] options.
• Relay Off: Set the "Alarm Acknowledged" or "Post
Alarm Time" option to off.

Network setup

TCP/IP Settings
The [DHCP], [IP Address], [Subnet Mask], [Gateway],
[Primary DNS], [Secondary DNS], [TCP/IP Port] and [Web
Server Port] option settings are not available in the client
program. You can set these options in the system menu of
the DVR.
• Bandwidth Throttle: Selects the bandwidth to adjust the
data traffic.
Client program