Recording; Instant Recording - LG LE2104 Owner's Manual

Recording

Images from a camera will be recorded on the built-in hard
disk.
Note:
External recording devices can be used as copy areas for
images recorded on the hard disk. It is impossible to record
images on the external recording devices directly.

Instant recording

Ensure all the cameras are connected and that time and
date have been set correctly. Before you start recording,
first check the repeat recording settings in the recording
menu of the system setup, and then make the recording
settings.
1. Press the REC button and then press the channel button
you want to record. The recording type indicator turns
green "I" on the selected channel screen of the main
monitor.
2. Press the REC button and then press the channel but-
ton you want to stop recording. If you stop instant
recording, the recording mode will be changed into the
scheduled recording mode (Continuous/ Alarm/ Motion
records). If the schedule is not set, the button indicator
turns off and the recording type indicator turns white
"N" on the selected channel screen of the main monitor.
40
Notes:
• You can instant record that the channels scheduled
such as alarm, motion or continuous.
• Once you stop instant recording, the recording type
indicator will be changed to the scheduled recording
mode.
• You can not record the Instant and Continuous record-
ing in following conditions.
- A HDD is not attached.
- A HDD is not formatted.
- The channel has no video input for display.
- Overwrite sets to "OFF" or "EVENT PARTITION", and
normal partition is full.
- On the HDD setting, the event partition is set to
100%.
• You can not record the Sensor and Motion recording in
following conditions.
- A HDD is not attached.
- A HDD is not formatted.
- The channel has no video input for display.
- Overwrite sets to "OFF" or "NORMAL PARTITION",
and event partition is full.
- On the HDD setting, the event partition is set to 0%.
- The schedule (Sensor/Motion) record is not set.
• HDD partition according to a recording type.
- Normal Partition: It is the space in the HDD that
stores the continuous and instant recorded data.
Once the normal partition is set to 0% (the event
partition is 100%), you can not record the continu-
ous or instant recordings.
- Event Partition: It is the space in the HDD that stores
the alarm and motion recorded data. Once the
event partition is set to 0%, you can not record the
alarm and motion recording.
• Priority of record.
Instant record > Sensor record > Motion record >
Continuous record.
• You can not do instant recording with the mouse.
Recording