LG LE2104 Owner's Manual page 38

• You cannot use the [Estimate], [Start] and [Erase]
options in backup progressing.
• Do not remove the USB device while the backup is in
progress, it may cause a malfunction. If you reuse the
removed device, you must format the media by using
erase media options.
• If you format the external media by using a PC, the
media may not be used on this unit.
• You can playback the backup data using this DVR only.
The backup data does not play back on the PC.
Instant Backup
1. Connect the backup USB device or insert a recordable
disk to the disc driver for backup.
2. Select the partition you want to backup.
3. Select [INSTANT] from the schedule options.
4. Select the backup device.
5. Set the [Time Range Date], [Time Range Start] , and
[Time Range End] option for backup.
6. Select the [Estimate] icon and press ENTER.
7. Check the size of the selected data and free space. If
the device has not enough space, create space on the
device or erase the previously stored data.
8. Select the [Start] icon and press ENTER to start backup.
9. Exit the setup menu.
You can check the backup status on the system infor-
mation window.
Notes:
• You cannot stop the backup in backup progress.
• The warning message will appear for the conditions
listed below.
- When the start time and end time are the same
value.
- When the start time is later than the end time.
- A media has not enough space.
- When you set the time for data that does not exist.
• The disc burning is carried out by a single session
closed format.
38
• If you use the CD/DVD writer device for backup,the
backup status will be displayed as shown below.
- 1st. Status of making ISO image
- 2nd. Status of writing
Daily/Weekly backup
1. Connect the USB device for backup.
You cannot use the CD or DVD writer for daily or weekly
backup.
2. Select [WEEKLY] or [DAILY] on the schedule options.
3. Select the backup device.
4. Enter the date and/or time to start backup on the
schedule start option.
5. Enter the day of week and/or time on the Time Range
Start option.
6. Enter the day of week and/or time on the Time Range
End option.
7. Select [Estimation] icon and press ENTER.
8. Check the size of selected data and free space of USB
device. If the USB device has not enough space, change
the USB device of enough space or erase the connected
USB device.
Notes:
• You cannot stop the backup in backup progress.
• The warning message will appear for the conditions
listed below.
- When the start time and end time setting are
wrong.
- A media does not have enough space.
- When you set the time for data that does not exist.
- When the selected USB device is disconnected.
• The estimated size of backup data is only the approxi-
mate size. So you must prepare sufficient space on the
media to prevent lack of space.
• When the backup process starts, you can check the
backup status on the system information window.
• While export is in progress or searching the backup
data from the external USB device, the scheduled back-
up will not be started.
After the export or backup search is finished, scheduled
backup will be restarted.
• When you set the schedule backup, the backup data
size is estimated from the recording settings of the
Setup menu. If the real recorded data size are over the
estimated recording data size, the schedule backup may
not be activated.
Connections and settings