LG LE2104 Owner's Manual page 36

User
You can register a new user with various access rights to the
DVR or client program.
• Number: Select the number to add new user ID or
change the user ID, user level or password.
• ID: Enter the new user ID using the virtual keyboard.
• Level: Select the level of the new user.
• Password: Enter or change the password for the user
using the virtual keyboard. You can use the password
with number, special character or characters. (Minimum
4 length, Maximum 8 length).
Note:
Remember the password. If you forget the password please
contact an authorized service center or the store where you
purchased the system.
36
Update
The update feature allows you to upgrade DVR software
and add/upgrade PTZ protocols. In this case, the current
DVR settings are not deleted or replaced during the update
process.
1. Select one of the following:
• Select SYSTEM S/W to upgrade DVR system soft-
ware.
• Select PTZ PROTOCOL to update the DVR protocols.
2. Choose the media from which to perform the update:
• USB: Select USB, and then insert the USB drive into
the DVR. All USB devices must be disconnected
before you can use the USB drive.
• NETWORK: Select NETWORK, and then do following:
1) Select the update server settings box. The vir-
tual keyboard is displayed.
2) Enter the update server IP address. The DVR net-
work settings must be configured and you must
know the update server's IP address.
3. Select [Update] and press ENTER to start the update
process.
4. Select [OK] and press ENTER to begin the update pro-
cess or select [Cancel] to stop and exit. After the update
process is completed, the system displays the dialogue
box for system restarting.
5. Select [OK] and press ENTER to restart the DVR.
Note:
You should install one of the formatted HDD for update. If
you do not install the HDD, the update will not work prop-
erly.
Connections and settings