Network Settings - LG LE2104 Owner's Manual

5. Click the right mouse button to exit the settings.
6. Select [Exit] and press ENTER to exit the sub-setup
menu.
Output
• Relay Off
- ALARM ACK.: Use the ALM.OFF button to stop
alarm.
- POST-ALARM TIME: The alarm is stopped after post-
alarm time.

Network Settings

Connections and settings
TCP/IP
• DHCP: DHCP stands for Dynamic Host Configuration
Protocol.
- ON: Network settings of this unit are configured
automatically by the DHCP server. You can use the
DDNS function instead of the dynamic IP address.
(For more details refer to the DDNS settings).
If you set to ON, the [IP Address], [Subnet Mask],
[Gateway], [Primary DNS] and [Secondary DNS]
options are not set.
- OFF: Enter the network settings manually.
• IP Address: Enter an IP address using the virtual key-
board.
• Subnet Mask: Enter a subnet mask address using the
virtual keyboard.
• Gateway: Enter the gateway address using the virtual
keyboard.
• Primary DNS: Enter the Main DNS server address using
the virtual keyboard.
• Secondary DNS: Enter the Sub DNS server address using
the virtual keyboard.
• TCP/IP Port: Enter the TCP/IP Port number using the
virtual keyboard. You can watch the live surveillance
image over the network with the PC Client program.
The factory default port for transmission of video and
audio data is 9001. However in some cases it is better to
change this port number for added flexibility or secu-
rity. If desired change the port number(1025 ~ 65535).
• Web Server Port: Enter the Web Sever Port number
using the virtual keyboard. You can watch the live sur-
veillance image over the network with a web browser.
Typically the TCP port used by HTTP is 80. However in
some cases it is better to change this port number for
added flexibility or security. If desired change the port
number (80 or 1025~ 65535).
• Bandwidth Throttle: Select the Bandwidth to adjust the
data traffic.
Note:
When you change the TCP/IP port or web sever port num-
ber, all connections with the PC Client programs or web
browser will be disconnected.
31