Rear Panel - LG LE2104 Owner's Manual

Rear Panel

Rear panel with the TV or VGA output select switch.
a b c
j
Rear panel without the TV or VGA output select switch.
a b c
j
a VIDEO INPUT
Connect the camera's video output to these BNC con-
nectors.
b LOOP OUT
The signal from VIDEO INPUT connector is looped out
to this connector.
c SPOT-OUT (BNC Type Connector)
Connect to spot monitor or display device.
d CONSOLE (RS-232C Connector)
Used to connect to a host device equipped with RS-
232C connector (such as a personal computer). This
unit can be controlled from other devices via this con-
nector.
e LAN Port
Connect the ethernet 10/100Mbps network cable for
controlling this unit via a PC network.
f TV or VGA output select switch. (This swith is optional
by models.)
g RS-485 Terminals
Connect RS-485 compatible cameras.
Connect the LKD1000 controller to D2 terminal.
Introduction
d e f
k l m n o p
d e f
k l m n o p
h ALARM IN/OUT Terminals
i Power Cord Inlet (DC 12V)
j MAIN-OUT (BNC Type Connector)
k AUDIO INPUT
l AUDIO OUT
m VGA
n USB Ports
o CONSOLE or ATM output select switch.
p MOUSE
g h i
g h i
- IN: Input terminals for alarm(relay) signal.
- OUT: Output terminals for alarm(relay) signal.
Connect the power plug.
Connect to main monitor or display device.
Connect the audio output of an external device.
Connect the audio input signal of an external device.
Connect a VGA monitor.
Connect an optional extension USB device.
(ATM is a reserved function.)
Connect an mouse device (PS2 Type).
9